Welcome To Moda Fabrics!

Heads Up Quilt

Heads Up Quilt

Written by: 
aharward

img_6305

Hello everyone!  My name is Amy Harward of Sew in Love Handmade and I am so excited to be able to share this beautiful quilt tutorial with you today!  Immediately when I saw Spectrum from V and Co., I knew I needed to make this quilt!  This quilt pattern is called Heads Up and it's color layout and theme are based on the concept that when we have hope and look for the good, we can rise out of the darkness into the light.

This quilt/project finishes at 68" x 68".

8cb62-title_ingredients

img_5526

2 jelly rolls of Spectrum by Vanessa Christensen of V & Co. {10860 JR}
1 yard White Bella Solid for block background {9900 98}
3.25 yards Grey Scale Paper for center of blocks and corner/setting triangles {10863 23}
4 1/2 yards Sand Geometric Print for backing {10860 20}
1 yard Turquoise Stripe for binding {10861 17}

96b91-title_instructions

Choosing Fabrics

Before you cut into your jelly roll strips, you will need to pick your fabrics. You will need 2 strips from each of 20 prints that you would like to use for the blocks.  Lay them out so that the strips are in a gradient from darkest at the bottom and lightest at the top, with like colors and tones by each other.

img_5538

Once you have the strips sorted in this gradient, sort the 20 fabrics into 5 groups of 4. (I was still trying to figure out where to put the green strips in this photo, and I eventually put one with the turquoise group and one with the navy group, so 5 groups of 4.)

img_5536

Now you need to put the strips in each group one on top of the other with the lightest on the top and the darkest on the bottom.  You will have 5 piles, one for each color group.

img_5544

Cutting

The 1st, 3rd, and 5th rows of the quilt have three blocks, while the 2nd and 4th rows have 2 blocks, so you need to cut them separately.

Cut the 1st, 3rd, and 5th row strips as follows:

Lightest strips - (3)2.5" x 10" and (3)2.5" x 12"
Second lightest strips - (3)2.5" x 9.5" and (3)2.5" x 11.5"
Second darkest strips - (3)2.5" x 9" and (3)2.5" x 11"
Darkest strips - (3)2.5" x 8.5" and (3)2.5" x 10.5"

img_5545  img_5552 img_5558 img_5562

Cut the 2nd and 4th row strips as follows:

Lightest strips - (2)2.5" x 10" and (2)2.5" x 12"
Second lightest strips - (2)2.5" x 9.5" and (2)2.5" x 11.5"
Second darkest strips - (2)2.5" x 9" and (2)2.5" x 11"
Darkest strips - (2)2.5" x 8.5" and (2)2.5" x 10.5"

img_5550  img_5554
img_5560  img_5565

Cut the neutral fabric for the block background as follows:

Cut 8 strips 2.5" x WOF
-Subcut strips until you have (26)2.5" x 2", (26)2.5" x 3.5", and (26)2.5" x 5" rectangles.

img_5569 img_5572

Cut the text fabric that will be the center of the blocks and the corner/setting triangles as follows:

DISCLAIMER BEFORE CUTTING TEXT FABRIC:

In the quilt that I made, the text fabric triangles are cut on the bias and the text runs left to right or top to bottom but on the center blocks the text was cut on the grain, so the text is bias since the blocks are set on point.  I will include instructions for both so you have the option of the text print all running the same way if you like!

Cut 2 strips 24.5" x WOF
-Subcut strips so you have (2)23 7/8" x 23 7/8" and (2)12.25" x 12.25" squares.

Cut the (2)12.25" x 12.25" squares diagonally. If you care about the direction of the text, cut 1 square on a left diagonal and 1 square on a right diagonal. These will be the corner triangles of the quilt.

img_5578 img_5579 img_5580 img_5581

Fold each 23 7/8" square (one at a time) by picking up the bottom right corner and lining it up with the top left corner.  Then fold again by picking up the bottom left folded edge and lining it up with the top right folded edge.  Press the folds with your fingers, ruler, or an iron.  Carefully cut the edge your just folded.  You now have two folded triangles.  Cut each in half along the center, lining your ruler up with the press mark.  You will now have 4 triangles for each square for a total of 8 triangles.  These will be used on the sides and top/bottom of the quilt and are called setting triangles.

img_5585 img_5586

img_5598 img_5599

img_5600 img_5594 img_5593 img_5590

img_5595

If you don't care about the text fabric's direction:

Cut 4 strips 8.5" x WOF
-Subcut strips until you have (13)8.5" x 8.5" squares.

If you do care about the text fabric's direction:

Cut 5 strips 12.25" x WOF

-Fold the strips in half at the short end (hot dog style) and crease so you have a mark at the center.  Using a ruler or your mat, cut a 45 degree angle from the center mark on each side.  Then use a ruler to cut a 8.5" x 8.5" square.  Continue to cut squares from each strip until you have (13)12.25" x 12.25" squares.

img_5620 img_5622 img_5623 img_5624

Block Assembly

Sew one 2.5" x 5" rectangle to each of the strips that are the lightest color in their group.
Sew one 2.5" x 3.5" rectangle to each of the strips that are the second lightest color in their group.
Sew one 2.5" x 2" rectangle to each of the strips that are the second darkest color in their group.

I loved chain piecing during this step!  It makes it really fast!

img_5605 img_5609

Press towards the dark fabric and your ready to assemble the blocks.

img_5616

(After you piece each strip to the block, press the fabric towards the dark side or away from the center square.)

Piece the shorter darkest color strip without a white background fabric to the right side of an 8.5" x 8.5" text fabric square.  If the text direction matters to you, make sure you arrange the square accordingly.  Press and piece the longer darkest color strip to the top of the square.  Press.

img_5626 img_5627

Piece the shorter second darkest color strip to the side of the block.  Press and piece the longer second darkest color strip to the top of the block.  Press.

img_5628 img_5629

Piece the shorter second lightest color strip to the side of the block.  Press and piece the longer second lightest color strip to the top of the block.

img_5630 img_5633

Piece the shorter lightest color strip to the side of the block.  Press and piece the longer lightest color strip to the top of the block.

img_5634 img_5636

Quilt Assembly

Lay out all your quilt blocks and setting triangles to make sure you are happy with the arrangement.  If text direction matters to you, make sure you arrange your setting triangles accordingly.

img_6208

On-point quilts may seem intimidating, but they are actually quite easy to assemble.  Instead of piecing rows top to bottom or left to right, all you have to do is turn to the side and you can see that the blocks and triangles form rows diagonally.

img_6212

So the first row to be assembled, will be a setting triangle, a lightest color grouping block, and another setting triangle.  Make sure that when you piece the triangles, that the fabric has a little tail that overhangs the block on both sides at least 1/4".

img_6209  img_6218

Piece the rest of the blocks and triangles together in rows.

img_6211 img_6212 img_6213 img_6214

Once your rows are pieced, you will piece the rows together.  As with the triangles when you piece them to the blocks, you will need to make sure that they overhang the blocks by at least 1/4" at each end.  Press into interlocking seams.

img_6230 img_6229

Now you will want to lay your corner triangles out and arrange them.  If the direction of the text print matters to you, make sure you arrange your corner triangles accordingly.

img_6232

Before you piece the corner triangles to the quilt, you will need to find the center of the triangle and the block that it will be pieced to.  To do this fold the triangle and the block in half and press with your finger to create a little crease.  Then place a pin in each of these creases, line up the pins, and pin them together.

img_6233 img_6235 img_6238 img_6239

Make sure that both the setting triangles and the corner triangles overhang each other by at least 1/4".  Piece and viola!  You have a gorgeous quilt top!

img_6240 img_6246

Quilt and bind as desired and then you have an even more beautiful quilt!

img_6286 img_6287

img_62821

 

4b2da-title_yield

img_6305

This quilt finishes at 68" x 68".

I hope you've enjoyed this tutorial and maybe learned something new!  If you would like to follow me and my quilting and creative adventures, you can visit me on my blog or my Etsy shop where I sell custom handmade dolls and gifts.  Happy sewing everyone!

Amy Harward
{sewinlovehandmade.com}

Posted in: 

Comments